Оснащение спортивных объектов
Оснащение спортивных объектовСтадион "Спартак", г. Москва
Монтаж спортивного оборудования
Монтаж спортивного оборудованияУТЦ «Новогорск»
Оборудование российского производства
Оборудование российского производстваГребная база, г. Краснодар
Поставка оборудования по всей стране
Поставка оборудования по всей странеУСК С.Хоркиной НИУ "БелГУ", г. Белгород
Консультации по подбору оборудования
Консультации по подбору оборудованияТренировочный центр «Озеро Круглое», г. Лобня
Комплексное оснащение спортивных сооружений

Футбол

Футбол

Соревновательное оборудование

Street soccer goals

"Transportable", with patented steel corner joints, 3 * 1.60 m

A freestanding goal of stable aluminium special profiles with the new patented steel corner joint. The result is a strong stability and long durability.

You can use this goal everywhere, for example on the schoolyard, in the street, on parking lots or in the garden.

The goal's frame is of square profile 80 * 80 mm, net hoop of circular tube, diameter 40 mm.

To save space the net hoops can be folded by unscrewing 2 screws.

Standard equipement: Goal inside dimensions 3 * 1.60 m, goal depth 1 m, natural bright aluminium finish, net hoops of aluminium tube, diameter 40 mm, incl. Safety system net holders.

Cat.-no. 19229 TÜV in connection with Supersafe anchoring systems Cat.-no. 1106

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Street soccer goals

"Transportable", with aluminium cast corner joints, 3 * 1.60 m

Same construction as small pitch goals 3 * 2 m "Transportable" of Cat.-no. 140 (page 15/16). Only the size is different.

You can use these goals both for mini handball and street soccer.

Cat.-no. 1922 TÜV in connection with Supersafe anchoring systems Cat.-no. 1222/12229

Accessories: Safety anchoring system of Cat.-no. 1229/12229 (page 35)

Playground goals

completely welded, 3 * 2 m

Wherever you need very strong goals, for example on playgrounds or school yards, we developed these goals completely welded in one piece made of aluminium.

Now we also supply an execution with lengthened uprights "For insertion into ground sockets" and with Basketball unit. A net is not necessary. There is a frame of stable aluminium tubes of 35 * 3 mm to catch the ball. Distance of tubes is 88 mm. The rear and lateral tubes are welded to an aluminium rectangular profile. 4 angles are welded to fasten the goal (freestanding goals).

The execution with a basketball unit provides an overhang of 60 cm and is delivered with a glassfibre back board of 120 * 90 cm, absolutely weather-proof, basket and net.

The execution "For insertion into ground sockets" is delivered with ground sockets – insertion depth 300 mm – and covers.

All types are acc. to EN 15312, in which the freestanding goals can be anchoring.

Very important: Goal depth is 1 m. You can choose two different executions: crossbar/upright of square profiles 80 * 80 mm or of oval profiles 120/100 mm.

Standard equipment: Natural bright aluminium bright finish.

Freestanding goals without Basketball unit:

Cat.-no. 1060 Goal frame of square profiles 80 * 80 mm

Cat.-no. 1061 Goal frame of oval profiles 120/100 mm

Freestanding goals with Basketball unit:

Cat.-no. 10601 Goal frame of square profiles 80 * 80 mm

Cat.-no. 10611 Goal frame of oval profiles 120/100 mm

Goals "For insertion into ground sockets", without Basketball unit:

Cat.-no. 1062 Goal frame of square profiles 80 * 80 mm

Cat.-no. 1063 Goal frame of oval profiles 120/100 mm

Goals "For insertion into ground sockets", with Basketball unit:

Cat.-no. 10621 Goal frame of square profiles 80 * 80 mm

Cat.-no. 10631 Goal frame of oval profiles 120/100 mm

Junior soccer and small pitch goals

"Transportable", "Compact", 5 * 2 m and 3 * 2 m

The junior soccer goals "Compact" are of the same construction as those described on page 22. They are different in goal size and the complete ground frame is made of special profiles 80 * 40 mm.

Also these goals are delivered with the proven Safety system net holders.

Standard equipment: Natural bright aluminium finish. On request delivery with handles at additional cost.

Cat.-no. 10521 5 * 2 m, Goal depth 1 m

TÜV in connection with the Safety anchoring systems of Cat.-no. 1229/12299.

Cat.-no. 10511 5 * 2 m, Goal depth 1.50 m

TÜV in connection with the Safety anchoring systems of Cat.-no. 1229/12299.

Cat.-no. 10531 5 * 2 m, Goal depth 2 m

Acc. to EN 748 and TÜV in connection with the Safety anchoring systems of Cat.-no. 1229/12299.

Cat.-no. 10591 3 * 2 m, Goal depth 1.50 m

TÜV in connection with the Safety anchoring systems of Cat.-no. 1229/12299.

Cat.-no. 1051 Handles (see detailed photo page 18)

Complete set consisting of 4 handles for 1 pair of goals

Accessories: Safety anchoring systems of Cat.-no. 1229/12299 (page 35) and Transportation rollers of Cat.-no. 11033 (page 39).

Soccer goals

"Transportable", "Compact", 7.32 * 2.44 m

"Compact" means: crossbar and uprights are completely welded in one piece as well as the ground frame. A special system links crossbar and uprights (see detailed photo) with the ground frame and is fixed with self-locking screws. Then only net hoop construction and net are mounted – the goal is ready to use.

A real alternative if you do not use completely welded goals even considering stability and durability. Freight costs are essentially more favourable due to the compact construction.

The compact construction offers the advantage of a spring effect which relieves the construction correspondingly. So breaks of the weldings in the uprights/ground frame construction are avoided.

Crossbar/uprights construction is made of the proven oval profiles 120/100 mm, ground frame of special profile 80 * 80 mm with groove to take the net holders. Net hoops are made of special stable aluminium tubes 50 * 4 mm.

Naturally we also deliver these goals with our proved Safety system net holders.

Standard equipment: Natural bright aluminium finish.

On request delivery with handles at additional cost.

Goals without handles:

Cat.-no. 1031 Goal Depth 1.50 m

TÜV in connection with the Safety anchoring systems of Cat.-no. 12221/122219.

Cat.-no. 1041 Goal Depth 2 m

Acc. to EN 748 and TÜV in connection with the Safety anchoring systems of Cat.-no. 12221/122219.

Goals with handles:

Cat.-no. 1032 Goal Depth 1.50 m

TÜV in connection with the Safety anchoring systems of Cat.-no. 12221/122219.

Cat.-no. 1042 Goal Depth 2 m

Acc. to EN 748 and TÜV in connection with the Safety anchoring systems of Cat.-no. 12221/122219.

Accessories: Safety anchoring systems of Cat.-no. 12221/122219 (page 35) Transportation rollers of Cat.-no. 11032 (page 39)

Junior soccer goals

"Transportable", "Inherently safe", completely welded, 5 * 2 m

These completely welded junior soccer goals are of the same construction as those in Cat.-no. 114. They are different in goal size because the goal depth is 1.50 m and 3 transportation rollers are welded to the rear on the ground tubes.

As with the soccer goals, these goals are also delivered with 4 steel weights 70 * 50 mm, length 1200 mm, per weight 33 kg, which are inserted in the rear ground tubes and ensure a tip-resistant position for the goal. The steel weights must be inserted in the goals onsite.

Crossbars/uprights of oval profile 120/100 mm, ground spars/ground tubes of profile 80 * 80 mm with pressed-in groove for fitting the net holders, net hoops of especially stable aluminium tubes 50 * 4 mm, 3 welded-on transportation rollers as well as 4 steel weights 33 kg each and 2 welded-on handles.

Of course these goals are only supplied with the proven Safety system net holders.

Standard equipment: Natural bright aluminium finish

Cat.-no. 115

Soccer goals

"Transportable", "Inherently safe", completely welded, 7.32 * 2.44 m

These completely welded goals have integrated steel weights, are absolutely resistant to tipping and can be used without any other ground anchors. The goal depth is 2 m. They comply with EN 748 and TÜV.

These goals are primarily used on artificial lawns or hard pitches, but can also be used on grass pitches.

4 steel weights 70 * 50 mm, length 1200 mm which are inserted into the rear ground tube. They each weigh 33 kg and ensure a stable, tip-resistant position for the goal. The steel weights must be inserted in the goals onsite.

At the front of the goal, a handle is welded to each side so that the goals can be tilted back and easily rolled (4 rollers per goal) to any location.

The rollers are made of foamed polyurethane and are thus puncture-resistant. They have the same running characteristics as inflated rollers.

Crossbars/uprights of oval profile 120/100 mm, ground spars/ground tubes of profile 80 * 80 mm with pressed-in groove for fitting the net holders, net hoops of especially stable aluminium tubes 50 * 4 mm, 4 welded-on transportation rollers as well as 4 steel weights 33 kg each and 2 welded-on handles.

Of course these goals are only supplied with the proven Safety system net holders

Standard equipment: Natural bright aluminium finish

Cat.-no. 114

Small pitch goals

"Transportable", completely welded, 3 * 2 m

Small pitch goals completely welded in one piece. Same construction as of junior soccer goals 5 * 2 m. On request delivery with handles at additional cost.

TÜV in connection with the Supersafe anchoring systems of the Cat.-no. 1229/12299

Standard equipment: Natural bright aluminium finish.

Cat.-no. 1059 Goal depth 1.50 m

Cat.-no. 1051 Handles (see detailed photo page 18)

Complete set consisting of 4 handles for 1 pair of goals

Accessories: Supersafe anchoring systems of Cat.-no. 1229/12299 (page 35) and Transportation rollers of Cat.-no. 11033 (page 39).

Junior soccer goals

"Transportable", completely welded, 5 * 2 m

Also these junior soccer goals 5 * 2 m are completely welded and of the same construction as those described on page 18. They are different in size and ground bars and ground tube are made of special profiles 80 * 40 mm.

On request delivery with handles at additional cost.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 105 Goal depth 1.50 m

TÜV in connection with the Supersafe anchoring systems of the Cat.-no. 1229/12299

Cat.-no. 1052 Goal depth 1 m

TÜV in connection with the Supersafe anchoring systems of the Cat.-no. 1229/12299

Cat.-no. 1053 Goal depth 2 m

Acc. to EN 748 and TÜV in connection with the Supersafe anchoring systems of the Cat.-no. 1229/12299

Cat.-no. 1051 Handles (see detailed photo page 18)

Complete set consisting of 4 handles for 1 pair of goals

Accessories: Supersafe anchoring systems of Cat.-no. 1229/12299 (page 35) and Transportation rollers of Cat.-no. 11033 (page 39).

Junior soccer goals

"Transportable", completely welded, 5 * 2 m

These junior soccer goals 5 * 2 m are completely welded and of the same construction as those described on page 18. They are different in size and ground bars and ground tube are made of special profiles 80 * 40 mm.

On request delivery with handles at additional cost.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 1055 Goal depth 1.50 m

TÜV in connection with the Supersafe anchoring systems of the Cat.-no. 1102/11029

Cat.-no. 1051 Handles (see detailed photo page 18)

Complete set consisting of 4 handles for 1 pair of goals

Accessories: Supersafe anchoring systems of Cat.-no. 1102/11029 (page 35) and Transportation rollers of Cat.-no. 11031 (page 39)

Soccer goals

"Transportable", completely welded, 7.32 * 2.44 m

These top goals are completely welded in one piece and therefore more stable and more durable.

Crossbar and uprights are of proven oval profiles 120/100 mm, ground tubes of special profile 80 * 80 mm with inserted groove for net holders, net hoop of special stable aluminium tubes 50 * 4 mm. Weldings are reinforced.

Ground bars and ground tubes are welded to the goal construction that way that all net holders are at the outside and thus there is no danger for the keeper.

Two additional handles are welded to make transport easier. Of course, these goals are delivered with our proved Safety system net holders.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 103 Goal depth 1.50 m TÜV in connection with the Supersafe anchoring systems of Cat.-no. 12221/122219.

Cat.-no. 104 Goal depth 2 m Acc. to EN 748 and TÜV in connection with the Supersafe anchoring systems of Cat.-no. 12221/122219.

Accessories: Supersafe anchoring systems of Cat.-no. 12221/122219 (page 35) and transportation rollers of Cat.-no. 11032 (page 39).

Junior soccer goals

"Transportable", with patented steel corner joint, 5 * 2 m

Due to the permanent transport of these goals the connection crossbar/upright is strongly used. A stable corner joint is absolutely important so that we also supply this goal with the patented steel corner joint, which has already proved in the handball goals. Otherwise the construction is the same as of junior soccer goals "Transportable" of Cat.-no. 120/121.

T?V in connection with the Supersafe anchoring systems Cat.-no. 1222/12229

Standard equipment: Matt silver anodised finish

Cat.-no. 1209

junior soccer goals 5 * 2 m "Transportable" with patented steel corner joint. Incl. net hoope, net hoop braces, ground frame with round ground tubes, ground spare covers and Safety system net holders

Cat.-no. 1219

junior soccer goals 5 * 2 m "Transportable" with reinforced ground tubes and patented steel corner joint. Incl. not hoops, not hoop braces, ground frame with reinforced ground tubes of aluminium profiles 80 * 40 mm, ground spare covers and Safety system net holders

Accessories: Supersafe anchoring systems of Cat.-no. 1222/12229 (page 35) and Safety ground frames of Cat.-no. 1223 (page 36)

Junior soccer and small pitch goals

"For insertion into ground sockets", with aluminium cast corner joints, 5 * 2 m and 3 * 2 m

Same goal execution as Cat.-no. 1001 (page 6) but with different goal sizes. It offers all advantages of the big goal.

Standard equipment: matt silver anodised finish.

Cat.-no. 1301

Junior Soccer goals 5 * 2 m

Cat.-no. 1501

Small Pitch goals 3 * 2 m

Junior soccer and small pitch goals

"For insertion into ground sockets", with aluminium cast corner joints, 5 * 2 m and 3 * 2 m

Goals intended "For insertion in ground sockets" corresponding dimensionally to the freestanding versions, being especially suitable where rearrangement is not necessary or required.

Technical features:

  • extremely stable and precise-fitting cast aluminium corner joint
  • reinforced aluminium net hoops
  • Safety system net holders

Cat.-no. 130

junior soccer goals 5 * 2 m "For insertion in ground sockets"

Cat.-no. 150

small pitch goals 3 * 2 m "For insertion in ground sockets"

Accessories: Ground frame "Upward folding", Cat.-no. 1941, 1942, 1841 or 1842 (page 7)

Standard equipment: Matt silver anodised finish or with black or red plastic stripes at additional cost. Incl. net hoops, net hoop braces, Safety system net holders, and ground sockets – insertion depth 500 mm – with cover, acc. to EN 748 and TÜV

Junior soccer and small pitch goals

"Transportable", with aluminium cast corner joints, 5 * 2 m and 3 * 2 m

For many years this standard execution of Haspo junior soccer goals and small pitch goals has proved. Of course, with decisive advantages:

  • Haspo German registered patent screw recess in the crossbar/upright joint problem area. More stability than with countersunk screwings
  • very stable and pecise-fitting aluminium cast corner joints
  • special stable execution by 1.20 m long ground spars closed at the end
  • net hoop construction of special aluminium tube 40 mm diameter
  • all screws with integrated locking so that loosening of screwed joints with the well-known disadvantageous effects are no longer possible
  • Safety system net holders
  • thought-out construction, quick assembly
  • optionally available – at additional costs – with reinforced ground tubes of 80 * 40 mm system profiles. These ground tubes may of course also be supplied as reftrofit set for already available goals.

Standard equipment: matt silver anodised finish or at additional costs with black or red plastic stripes Cat.-no. 120/121

TÜV in connection with Safety base frame Cat.-no. 1223 or Supersafe anchoring systems Cat.-no. 1222/12229

Cat.-no. 140/141

TÜV in connection with Safety base frame Cat.-no. 1224 or Supersafe anchoring systems Cat.-no. 1222/12229

Cat.-no. 122/142

TÜV in connection with junior soccer goals/small pitch goals Cat.-no. 120/121/140/141

Accessories: Supersafe anchoring systems of Cat.-no. 1222/12229 (page 35) and Safety ground frames of Cat.-no. 1223/1224 (page 36).

Junior soccer and small pitch goals

"Transportable", with steel net hoops, with aluminium cast corner joints, 5 * 2 m and 3 * 2 m

Absolutely top class junior soccer/small pitch goals. There is no better goal of same stability and strength.

Same net hoop/base frame construction made of galvanized steel tube like handball goals for indoors Cat-no. 200 (detailed description see page 50).

Technical features: A construction with especially strong net hoops made of galvanized steel tubes.

No slip-on connections, therefore extremely solid and stable. Extremely strong mold aluminium corner joints fitting perfectly.

  • all screws with integrated securing
  • Safety system net holders
  • simple and quick assembly and disassembly

Standard equipment: Matt silver anodised finish incl. net hoops and ground tubes made of galvanized steel tube, upright covers and Safety system net holders.

Accessories: Supersafe anchoring systems of the Cat.-no. 1227/12279 (page 35), Safety base frames of the Cat.-no. 1225/1226 (page 36)

TÜV in connection with the Safety base frames of the Cat.-no. 1225/1226 or the Supersafe anchoring systems of the Cat.-no. 1227/12279.

Cat.-no. 1201 junior soccer goals 5 * 2 m

Cat.-no. 1401 small pitch goals 3 * 2 m

Junior soccer goals

"Slewable", with aluminium cast corner joints, 5 * 2 m

If there is not enough space for freestanding goals you can use this goal construction.

Outside the sports ground two ground sockets per goal are set in concrete to pick up profiles with hinges so that the goal construction can be fixed. Hinges are also available in the lower parts of the uprights.

Rollers are mounted at the side bars of the goals so that they can easily be slowed with mounted net. One person can do that without any tool.

The distance between front edge ground socker and front edge upright is adjustable from 3.24 m to 4.28 m. Other distance can be requested.

Crossbar/upright construction of oval profile 120/100 mm, complete ground frame of aluminium special double chamber profile 80 * 40 mm, net hoop of especially stable aluminium tube 50 * 4 mm.

Also these goals are equipped with our Safety system net holders.

Contrary to the photo, there are not two short pick up profiles located in the rear area where the spars are attached but rather a short and a long pick up profile (2.20 m protruding from the sleeve). The goal construction is fixed onto the long pick up profile when it is folded.

Standard equipment: Crossbar/upright matt silver anodised, ground frame/net hoops of natural bright aluminium finish.

Cat.-no. 1250

Soccer goals

"Transportable", Type "Switzerland", with welded mitres, 5 * 2 m

Photo above (as Cat.-no. 118)

This execution corresponds to the above junior soccer goals but it is delivered with "welded mitres" (as Cat.-no. 119, page 11).

Cat.-no. 1191

TÜV in connection with Supersafe anchoring system

Cat.-no. 1229/12299

Accessories: same as Cat.-no. 118

Junior soccer goals and small pitch goals

"Transportable", Type "Switzerland", with aluminium cast corner joints 5 * 2 m and 3 * 2 m

Also these junior soccer goals correspond to the regulations of the Swiss Soccer Association (SFV).

Same construction as the soccer goals "Tranportable" of Cat.-no. 107 (page 12) expect goal height and length of ground spars.

Cat.-no. 118

5 * 2 m, the ground tubes can be displaced at a distance of 1 m, so that nets of a lower depth of 1 m will fit. TÜV in connection with Supersafe anchoring systems Cat.-no. 1229/12299

Cat.-no. 117

3 * 2 m, the ground tubes can be displaced at a distance of 1 m, so that nets of a lower depth of 1 m will fit. TÜV in connection with Supersafe anchoring systems Cat.-no. 1229/12299

Accessories: Supersafe anchoring systems of Cat.-no. 1229/12299 (page 35) and Transportation rollers of Cat.-no. 11033 (page 39).

Standard equipment: Crossbar/uprights matt silver anodised, ground frame/net hoops of natural bright aluminium finish. Incl. net hoops of aluminium tube, diameter 40 mm, net hoop braces, Safety system net holders and ground frame of rectangular profile 80 * 40 mm, goal depth 1.50 m

Soccer goals

"Transportable", Type "Switzerland", with welded mitres, 7.32 * 2.44 m

Same construction as goals "Transportable" of Cat.-no. 108 (page 10), but only crossbar/upright in white powder coated and complete ground frame made of special profiles 80 * 40 mm acc. to the Swiss Soccer Association's regulations (SFV).

Cat.-no. 1081

Acc. to EN 748 and TÜV in connection with Supersafe anchoring systems Cat.-no. 1228/12289

Accessories: Supersafe anchoring systems of Cat.-no. 1228/12289 (page 35) and Transportation rollers of Cat.-no. 11033 (page 39).

Soccer goals

"Transportable", Type "Switzerland", with aluminium cast corner joints, 7.32 * 2.44 m

This goal corresponds to the regulations of the Swiss Soccer Associ ation (SFV) and was especially developed for the Swiss market but can also be used in all other countries:

  • crossbar/uprights of proved oval profiles 120/100 mm,
  • ground spars/ground tubes of stable rectangle profiles 80 * 40 mm
  • exact fitting aluminium cast corner joints
  • reinforced links (connection uprights/ground spars) welded on the ground spars
  • very strong net hoops of aluminium tubes 40 mm diameter,
  • stable links at net hoops fitting exactly in the groove of goal profiles
  • 2 m long ground spars improve stability
  • integrated securing screws
  • Safety system net holders

Same construction as soccer goals "Transportable" of Cat.-no. 108 (page 10) except connection crossbar/uprights and height of ground spars.

Standard equipment: Crossbar/upright white powder coated, ground frame/net hoops of natural bright aluminium finish. Incl. net hoops and net hoop braces of aluminium tube 40 mm diameter, Safety system net holders and ground frame of rectangular profile 80 * 40 mm, goal depth 2 m.

Cat.-no. 107

Acc. to EN 748 and TÜV in connection with Supersafe anchoring system Cat.-no. 1228/12289

Accessories: Supersafe anchoring systems of Cat.-no. 1228/12289 (page 35) and Transportation rollers of Cat.-no. 11033 (page 39).

Junior soccer goals

"Transportable", with welded mitres, 5 * 2 m

These are top goals and similar to the goals "Transportable" of Cat.-no. 108 (page 10).

1.50 m long ground spars guarantee a special strong execution. Of course, the ends of the ground spars are closed.

Standard equipment: Crossbar/uprights matt silver anodised and ground frame of natural bright aluminium finish. Incl. net hoops of aluminium tube, diameter 40 mm, net hoop braces, Safety system net holders and ground frame, goal depth 1.50 m.

The ground tubes can be displaced at a distance of 1 m, so that nets of a lower depth of 1 m will fit.

Cat.-no. 119

TÜV in connection with Supersafe anchoring system

Cat.-no. 1222/12229

Accessories: Safety anchoring systems of Cat.-no. 1222/12229 (page 35) and Transportation rollers of Cat.-no. 11032 (page 39).

Soccer goals

"Transportable", with aluminium cast corner joints, 7.32 * 2.44 m

Our soccer goals "Transportable" are used where, e. g. for training purposes, goals are needed quickly at any location without elaborate preparation.

Technical features: Rugged design with the same technical features as the soccer goals. Ground sockets are not necessary.

Acc. to EN 748 and TÜV in connection with Supersafe anchoring systems Cat.-no. 1102/11029

Accessories: Safety anchoring systems of Cat.-no. 1102/11029 (page 35) and Transportation rollers of Cat.-no. 11031 (page 39)

Standard equipment: Matt silver anodised finish.

Cat.-no. 109

Incl. net hoops, net hoop braces and supporting braces made of aluminium tube 40 mm diameter, Safety system net holders and base frame of same profile as crossbar/upright construction, goal depth 2 m

Cat.-no. 110

Incl. net hoops, net hoop braces made of aluminium tube 30 mm diameter, supporting braces made of aluminium tube 40 mm diameter, otherwise identical to Cat.-no. 109, goal depth 2 m

Soccer goals

"Transportable", with welded mitres, 7.32 * 2.44 m

The customer's wish for more stable and stronger goals was the reason for the development of this production line.

The "new generation" of soccer goals "Transportable" of 7.32 * 2.44 m with decisive improvements and innovations:

  • welded mitres of crossbars
  • crossbar/uprights of proved oval profiles 120/100 mm
  • ground spars/ground tubes of stable square profiles 80 * 80 mm
  • special fasteners fitting exactly between crossbar and uprights
  • reinforced links of uprights/ground spars welded on the ground spars
  • very strong net hoops of aluminium tube 40 mm diameter
  • stable links at net hoops fitting exactly in the groove of the goals
  • long ground spars to improve stability
  • Safety system net holders

Stability and durability are substantially improved by the above mentioned construction details.

Top goals bearing each comparision.

Technical features: The goals with decisive advantages and improvements. High stability and consequently durability by welded mitres of the crossbars, special fasteners in crossbar/upright construction and fasteners additionally reinforced and welded in upright/ground spar construction as well as reinforced net hoops of stable aluminium tubes 40 mm diameter.

Elegant new construction. The ground spars of stable square profile 80 * 80 mm are incorporated in the proved oval profile 120/100 mm (see detailed photo).

  • equipped with integrated securing screws
  • Safety system net holders
  • simple, quick assembly and disassembly by special fasteners in crossbar/upright and upright/ground spar construction (see detailed photo)
  • 2 m long ground spars guarantee a special strong execution. Of course the ends of the ground spars are closed.

Standard equipment: Crossbar/uprights matt silver anodised and ground frame of natural bright aluminium finish. Incl. net hoops and net hoop braces of aluminium tube 40 mm diameter, Safety system net holders and ground frame, goal depth 2 m.

Cat.-no. 108

Acc. to EN 748 and TÜV in connection with Supersafe anchoring systems Cat.-no. 12221/122219

Accessories: Safety anchoring systems of Cat.-no. 12221/122219 (page 35) and Transportation rollers of Cat.-no. 11032 (page 39).

Soccer goals

"For insertion into ground sockets", with welded mitres, with net holder rail, 7.32 * 2.44 m

Due to the positive experiences with our soccer goals "For insertion into ground sockets" these special stable goals were developed (see detail photo 1).

There are following decisive innovations and improvements:

  • welded mitres at the crossbar
  • special fasteners fitted exactly between crossbar and uprights (see detail photo 2)
  • net hoops with long and stable links which fit exactly in the groove of the goal profiles (see detail photo 3)
  • net holder rail (see detail photo 4)

Technical features: The goals with decisive advantages and improvements. High stability and consequently dura bility by welded mitres of the crossbars, special fasteners in crossbar/upright construction and net hoops with long and stable links fitting exactly in the groove of the goals profiles and therefore reinforcing additionally the connection crossbar/uprights.

  • net holder rail
  • simple, quick assembly and disassembly
  • one hundred percent steady goal location in ground sockets by use of special wedges – no wavering of goals

Comply with DFB and FIFA regulations acc. EN 748 and TÜV

The net holder rail (see detail photo 4) has, compared to usual net holders, certain advantages:

  • nets can be easily and quickly hooked in/unhooked
  • net hooks must not be screwed in/slid in
  • net hooks do not get lost
  • same distance of hook-in points

The openings for the nets in the net holder rail are punched so that they do not have sharp edges or burrs. The net holder rail is already welded into the profile. The profile and holder form a unit.

Standard equipment: Crossbar/upright mattsilver anodised or white powder coated. Incl. net hoops and net hoop braces made of aluminium tube 30 mm diameter, natural bright aluminium finish, Safety system net holders, ground sockets – insertion depth 500 mm – with covers and special wedges.

Cat.-no. 98 anodised
Cat.-no. 985 white

Without illustration:

Soccer goals as described above but with "Free hanging net" (same free hanging net as of soccer goals of Cat.-no. 101 on page 6).

Cat.-no. 981 anodised
Cat.-no. 9815 white

Accessories: Ground frame "Upward folding" Cat.-no. 194, 184, 185 (page 7)

Junior soccer goals

"For insertion into ground sockets", with welded mitres, 5 * 2 m

Same goal construcion as of soccer goals with welded mitres of Cat.-no. 98. The only difference is the goal dimensions. As of now you can also dispose of a top class goal for junior matches.

Standard equipment: 5 * 2 m

Standard equipment: Matt silver anodised finish Cat.-no. 1302

Soccer goals

Soccer goals

"For insertion into ground sockets", with welded mitres, 7.32 * 2.44 m

Due to the positive experiences with our soccer goals "For insertion into ground sockets" these special stable goals were developed.

There are following decisive innovations and improvements:

  • welded mitres at the crossbar
  • special fasteners fitted exactly between crossbar and uprights,
  • net hoops with long and stable links which fit exactly in the groove of the goal profiles
  • Safety system net holders

Stability and durability are improved decisively by the above mentioned construction characteristics. Top goals bearing each comparison.

Technical features: The goals with decisive advantages and improvements. High stability and consequently dura bility by welded mitres of the crossbars, special fasteners in crossbar/upright construction and net hoops with long and stable links fitting exactly in the groove of the goals profiles and therefore reinforcing additionally the connection crossbar/uprights.

  • Safety system net holders
  • simple, quick assembly and disassembly
  • one hundred percent steady goal location in ground sockets by use of special wedges – no wavering of goals

Comply with DFB and FIFA regulations acc. EN 748 and TÜV

Standard equipment: Crossbar/upright mattsilver anodised or white powder coated. Incl. net hoops and net hoop braces made of aluminium tube 30 mm diameter, natural bright aluminium finish, Safety system net holders, ground sockets – insertion depth 500 mm – with covers and special wedges.

Cat.-no. 98 anodised
Cat.-no. 985 white

Without illustration:

Soccer goals as described above but with "Free hanging net" (same free hanging net as of soccer goals of Cat.-no. 101 on page 6).

Cat.-no. 981 anodised
Cat.-no. 9815 white

Accessories: Ground frame "Upward folding" Cat.-no. 194, 184, 185 (page 7)

Soccer goals

Soccer goals

"For insertion into ground sockets", with aluminium cast corner joints, 7.32 × 2.44 m

Technical features: For more than 30 years our wellestablished construction, which has constantly been modified. However, we always took care that spare parts are also provided for "old goals".

The goals with decisive advantages:

  • extremely stable and precise-fitting aluminium cast corner joints
  • reinforced aluminium net hoops
  • quick and simple assembly and disassembly
  • Safety system net holders
  • one hundred percent steady goal, location in ground sockets by use of special wedges

Comply with DFB and FIFA regulations

Standard equipment: Matt silver anodised finish or white powder coated at additional cost.

Accessories: Ground frame "Upward folding", Cat.-no. 194, 184 and 185 (page 7)

Cat.-no. 99 anodised*
Cat.-no. 995 white*

Incl. net hoops and net hoop braces made of aluminium tube 40 mm diameter, Safety systems net holders, ground sockets – insertion depth 500 mm – with cover and special wedges, acc. to EN 748 and TÜV

Cat.-no. 100 anodised*
Cat.-no. 1005 white*

Identical to Cat.-no. 99 but net hoops and net hoop braces made of aluminium tube 30 mm diameter, acc. to EN 748 and TÜV

Cat.-no. 1001 anodised*
Cat.-no. 10015 white*

Identical Cat.-no. 100, but without special wedges, acc. to EN 748 and TÜV

Cat.-no. 101 anodised*
Cat.-no. 1015 white*

Incl. "Free hanging net" consisting of galv. steel upright with ground sockets and all tensioning ropes, Safety system net holders, ground sockets – insertion depth 500 mm – with cover and special wedges, acc. to EN 748 and TÜV

"Free hanging net" retrofit set

Cat.-no. 1010

Incl. galv. steel uprights with ground sockets and all tensioning ropes

Cat.-no. 102 anodised
Cat.-no. 1025 white

Incl. "Ground net hoops" and matching ground sockets, net hoop braces, Safety system net holders, ground sockets – insertion depth 500 mm – with cover and special wedges

Тренировочное оборудование

Small goals

"Transportable", Type "Netherlands", 3 * 1 m

These goals were developed by the Royal Dutch Soccer Association as official goals for 5 to 6 years old children for matches "4 against 4". However, they are also excellently suitable for training and leisure time purposes.

Very stable and durable execution. Goal frame of special system profile 80 * 40 mm, welded in one piece. Net hoops – folding – of stable aluminium tubes 40 mm. Net fixing also with the Safety system net holders, goal depth 0.80 m.

In order to meet the different requirements delivery in natural bright aluminium finish or goal frame yellow powder coated, remaining construction natural bright aluminium finish.

Standard equipment: Natural bright aluminium finish, incl. nets with 100 mm mesh size and Safety system net holders

Cat.-no. 1924

Standard equipment: Goal frame yellow powder coated, remaining construction natural bright aluminium finish, incl. nets with 100 mm mesh size and Safety system net holders

Cat.-no. 1925

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Play and leisure goals

"Transportable", 1.05 * 0.70 m

The objective was to construct a goal for the play and leisure sector. The products in this market segment were previously of low quality. They are made from plastic or with metal profiles without a groove.

This goal is a premium product. Thanks to its size, it can be sent as a parcel at minimal cost.

The goal was developed for private use and for nurseries and childcare facilities.

The special feature of this design: the connection of crossbar/uprights of 90° bows – the goal frame has, therefore, rounded edges significantly reducing the risk of injury, particularly in the head and face region, since all sharp edges have been eliminated.

The welded goal frame is made of robust aluminium system profiles with a diameter of 60 mm and, based on the 90° bows, forms one single unit.

Technical features: Extremely robust and durable design. The welded goal frame is made of special-system profiles with a diameter of 60 mm and forms, based on the two 90° bows, one single unit. Net hangers made of robust aluminium tubes with a diameter of 40 mm.

The net is attached at the goal frame using the Safety system net holders.

The net hangers can be retracted (to save space when storing them) by untightening the wing nuts and removing the screws at the upper hinges.

Comes with special hinges to fix the net hanger. Therefore, the ground tube is not necessary.

Standard equipment: Natural bright aluminium finish, incl. net having a mesh size of 45 mm and Safety system net holders.

Cat.-no. 15145

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Safety mini training goals

"Transportable", 1.20 * 0.80 m and 1.80 * 1.20 m

These goals are the result of consistent enhancements of our previous mini goals, which are still available.

This design is an absolute innovation.

The special feature of this design: the connection of crossbar/uprights of 90° bows – the goal frame has, therefore, rounded edges significantly reducing the risk of injury, particularly in the head and face region of children, since all sharp edges have been eliminated.

The welded goal frame is made of robust aluminium system profiles with a diameter of 60 mm and, based on the two 90° bows, forms one single unit.

Technical features: Extremely robust and durable design. The welded goal frame is made of special-system profiles with a diameter of 60 mm and forms, based on the two 90° bows, one single unit. Net hangers made of robust aluminium tubes with a diameter of 40 mm.

The net is attached at the goal frame using the Safety system net holders.

The net hangers can be retracted (to save space when storing them) by untightening the wing nuts and removing the screws at the upper hinges. Comes with special hinges to fix the net hanger. Therefore, the ground tube is not necessary.

Inside dimensions 1.20 * 0.80 m, Goal depth 0.70 m

Standard equipment: natural bright aluminium finish, incl. net with mesh size of 45 mm and Safety system net holders

Cat.-no. 15245

Inside dimensions 1.80 * 1.20 m, Goal depth 0.70 m

Standard equipment: natural bright aluminium finish, incl. net with mesh size of 45 mm and Safety system net holders

Cat.-no. 152145

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Mini training goals

"Transportable", 1.20 * 0.80 m, 1.80 * 1.20 m and 2.40 * 1.60 m

Small goals developed by experts for soccer training but also to be used for other kinds of sports and games as for street hockey and street soccer for example.

These goals guarantee high stability and are necessary for an effective training and playing programme for children and adults. They will enjoy playing and training again.

This goal can be used for several training possibilities, by using 4 goals for partner games for example.

Technical features: Extremely strong and durable execution. Frame of special system profiles 80 * 40 mm, completely welded. Net hoops and ground tube of stable aluminium tubes. Net fixing at goal frame by Safety system net holders. After removing 2 wing screws the ground tube can be separated and the net hoops folded to save space during storage.

Now with special hinges to "fix the net hoops" so that a ground tube is no more necessary. Therefore damages of the ground tube in case of heavy duty are eliminated.

We can deliver nets with mesh sizes of 100 mm or 45 mm (except Cat.-no. 1923).

Inside dimensions 1.20 * 0.80 m, Goal depth 0.70 m

Standard equipment: Natural bright aluminium finish, net hoops of aluminium tube 40 mm diameter, incl. net and Safety system net holders.

Cat.-no. 192 (Mesh size 100 mm)

Cat.-no. 19245 (Mesh size 45 mm)

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Inside dimensions 1.80 * 1.20 m, Goal depth 0.70 m

Standard equipment: natural bright aluminium finish, net hoops of aluminium tube 40 mm diameter, incl. net and Safety system net holders.

Cat.-no. 1921 (Mesh size 100 mm)

Cat.-no. 192145 (Mesh size 45 mm)

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Inside dimensions 2.40 * 1.60 m, Goal depth 1 m

Standard equipment: Natural bright aluminium finish, net hoops of aluminium tube 40 mm diameter, incl. net with 100 mm mesh size and Safety system net holders.

Cat.-no. 1923 (Mesh size 100 mm)

Accessories: Safety anchoring system of Cat.-no. 1106 (page 34)

Mini training goals

"Transportable", completely welded, 1.20 * 0.80 m, 1.80 * 1.20 m and 2.40 * 1.60 m

Due to the positive experiences with the big completely welded goals these small training goals completely welded were developed.

The goal frame is made of system profiles 80 * 80 mm, ground frame of profiles 80 * 40 mm, stable net hoops of aluminium tube 40 mm diameter. Net fixing with Safety system net holders. Extremely stable due to the materials used and the wellthought-out design.

Standard equipment: Natural bright aluminium finish, incl. net and Safety system net holders. We can deliver nets with mesh sizes of 100 and 45 mm (except Cat.-no. 1723).

Inside dimensions 1.20 * 0.80 m, Goal depth 0.70 m

Cat.-no. 172 (Mesh size 100 mm)

Cat.-no. 17245 (Mesh size 45 mm)

Inside dimensions 1.80 * 1.20 m, Goal depth 0.70 m

Cat.-no. 1721 (Mesh size 100 mm)

Cat.-no. 172145 (Mesh size 45 mm)

Inside dimensions 2.40 * 1.60 m, Goal depth 1 m

Cat.-no. 1723 (Mesh size 100 mm)

Accessories: Safety anchoring systems of Cat.-no. 1107 (page 34).

Street soccer goals

"Transportable", completely welded, 3 * 1.60 m

These street soccer goals were developed as a result of the positive experience of the fully welded mini goals of Cat.-no. 172, 1721 and 1723.

These goals are ideally suited for youth matches in the younger age groups. The size ratio of the crossbar to the posts is closer to that of senior goals. Small pitch goals in size 3 * 2 m are simply too high for young players. Thanks to their sturdy construction, these goals are also especially good for the public sector.

The goal frame is made from the system profiles 80 * 40 mm, with sturdy net brackets made from aluminium tube 40 mm diameter. The net is of course held in place by the Safety system net holders. The materials used and the well-thought-out construction make the goal extremely stable.

Standard equipment: Natural bright aluminium finish, incl. net having a mesh size of 100 mm and Safety system net holders.

Cat.-no. 1726 Goal depth 1 m

Accessories: Safety anchoring system of Cat.-no. 1107 (page 34)

Mini playground goals

"Transportable", completely welded, 1.20 * 0.80 m and 1.80 * 1.20 m

With the exception of goal size this goal can be compared with the playground goals (page 25) and due to the used material it shows utmost stability – practically indestructible.

The goal frame is made of system profiles 80 * 80 mm, base frame of profiles 80 * 40 mm. To catch the ball a frame of stable aluminium tubes is welded (Cat.-no. 162 with 30 mm diameter, Cat.-no. 1621 with 35 mm diameter). Distance of tubes is about 88 mm.

2 fixing angles are welded at the ground frame to fix the goal at the ground.

Standard equipment: Natural bright aluminium finish.

Cat.-no. 162 Inside dimensions 1.20 * 0.80 m, Goal depth 0.70 m

Cat.-no. 1621 Inside dimensions 1.80 * 1.20 m, Goal depth 0.70 m

Playground goals

"Compact", 3 * 2 m

Wherever goals are set up unattended, such as on kick-about fields, playing fields and playgrounds, particularly stable goals must be used.

"Compact" means: Crossbar/post construction is welded in one piece, as is the entire base frame. A special connection system is used to connect the crossbar/post construction to the base frame, where it is screwed in with self-retaining screws. Then only the net bracket construction and net remain to be mounted – and the goal is ready to use.

Compared to fully welded goals, the compact construction has the advantage of offering a shock-absorbing effect, relieving the construction. This means that the familiar fatigue fractures in the welded seams do not occur around the post/base frame construction.

The entire goal is made from oval profiles 120/100 mm. Because the ISSN (integrated Safety system net holder) is mounted in a deeper groove in the profile, it ends flush with the profile. This has significant advantages, especially for the goalkeeper around the base frame. The risk of injury is minimised. The risk of injury through contact with the post is also reduced. Because the groove in which the net hook is mounted is sufficiently large, there is no problem with mounting the net holder.

The net brackets are made from particularly robust aluminium tubes 50 * 4 mm. The goals are delivered only with our tried-andtested Safety system net holders. 4 elbows are welded onto each goal for anchoring.

The goal is delivered with a vandal-proof net. The net is made from Hercules cord and has a diameter of 5 mm and a steel inlay. Tensioning ropes and a mounting set are provided. The green polypropylene net has abrasion protection. The mesh size is 110 mm; the mesh position is diagonal. The net can only be destroyed with extreme violence, making it ideal for public kick-about fields.

Standard equipment: Natural bright aluminium finish, incl. net.

Cat.-no. 10592 Goal depth 1.15 m

Indoor soccer goals

"Transportable", with "Folding net hoops", with aluminium cast corner joints, 5 * 2 m

More and more indoor soccer is played. But so far suitable goals were missing meeting the requirements of this sports discipline. The handball goals 3 * 2 m available in the gymnasia are too small – the goals used outdoor do not meet the requirements of the gymnasia. Based on the positive experiences made with the indoor handball goals with "Folding net hoops", this goal construction was developed which is meeting all requirements.

Technical features: Crossbar/upright construction and corner joints like junior soccer goals of Cat.-no. 120/121. Extremely stable construction due to galvanized steel net hoops, which can be folded if goals are not used – thus space-saving storage. No damage to the gymnasium floor – felt predectors and upright cover prevent contact with the aluminium/steel parts with the gymnasium floor.

  • all screws with integrated securing
  • Safety system net holders
  • simple, quick assembly and disassembly

Standard equipment: Matt silver anodised finish incl. net hoops and ground tubes made of galvanized steel tube, upright covers and Safety system net holders

Cat.-no. 1205

Junior soccer and small pitch goals

"Transportable", with aluminium cast corner joints

Cat.-no. 120

junior soccer goals 5 * 2 m

Cat.-no. 140

small pitch goals 3 * 2 m

Standard equipment: Incl. net hoops, net hoop braces, base frame with round tubes, ground spar seal covers and Safety system net holders.

Cat.-no. 121

junior soccer goals 5 * 2 m with reinforced ground tubes

Cat.-no. 141

small pitch goals 3 * 2 m with reinforced ground tubes

Standard equipment: Incl. net hoops, net hoop braces, base frame with reinforced ground tubes made of aluminium system profiles 80 * 40 mm, covers for ground tubes and Safety system net holders.

Cat.-no. 122

Retrofit Set "Reinforced Ground Tubes" for junior soccer goals 5 * 2 m

Cat.-no. 142

Retrofit Set "Reinforced Ground Tubes" for small pitch goals 3 * 2 m

Standard equipment: Consisting of reinforced ground tubes made of 80 * 40 mm aluminium system profiles and all necessary mounting materials.

Base frames

"Upward folding", Type "Bundesliga"

This "Upward folding" base frame was developed on the basis of our well-established base frames of Cat.-no. 194, 1941 and 1942. It is, however, made of special aluminium double chamber profiles 80 * 40 mm.

Technical features: The base frames are supplied in two parts and both parts are linked with especially strong aluminium angles. The base frame is fixed to the goal construction by means of special hinges being mounted at the uprights. Fixing of the net is done in the lateral chamber with the Safety system net holders. Thus the net can be removed without any problems. The Safety system net holders remain at the net.

It can also be used as retrofit set for all existent goals.

Standard equipment: Natural bright aluminium finish, incl. Safety system net holders and all necessary accessories

Cat.-no. 184

For soccer goals 7.32 * 2.44 m "For insertion into ground sockets", for net depths of 1.50 m, not adjustable

Cat.-no. 185

For soccer goals 7.32 * 2.44 m "For insertion into ground sockets", for net depths of 2 m, not adjustable

Cat.-no. 1841

For junior soccer goals 5 * 2 m "For insertion into ground sockets", for net depths of 1 m, not adjustable

Cat.-no. 1842

For junior soccer goals 3 * 2 m "For insertion into ground sockets", for net depths of 1 m, not adjustable

Base frames

"Upward folding", with steplessly adjustable net depth regulation

If you want to make lawn care easier, this fully "Upward folding" base frame – also of course of all – aluminium manufacture – is an absolute necessity. Alongside easier pitch care, the nets are also better predected; no damage to nets from lawnmowers. An investment with short-term payoff.

Technical features: A structure of especially strong aluminium tubes. Diameter 40 mm, depth of base frame for net depths from 1.50 to 2 m, steplessly adjustable. The upward folding feature is achieved by stable hinges simply fitted to the uprights. Also available as retrofit set for all existing goals.

Standard equipment: Natural bright aluminium finish incl. all necessary accessories.

Cat.-no. 194

For soccer goals, 7.32 * 2.44 m steplessly adjustable for net depths of 1.50 m to 2 m, for insertion into ground sockets

Cat.-no. 1941

For junior soccer goals, 5 * 2 m for net depths of 1 m, for insertion into ground sockets, not adjustable

Cat.-no. 1942

For small pitch goals, 3 * 2 m for net depths of 1 m, for insertion into ground sockets, not adjustable

Дополнительно

Safety base frames

for freestanding goals for all kinds of pitches

These Safety anchoring systems for freestanding goals on grass pitches meanwhile stood the test and have become an indispensable accessory for safety. However, in practice, it became clear that there was no comparable anchoring system for hard pitches, for artificial lawns and also for indoors which also granted the optimal predection against tilting of goals. This was enough reason for us to develop an appropriate practice-oriented system.

The result: This Safety base frame. They are simply mounted – without much sacrifice of time – to the base frames of the goals which results in a depth of 2 m of the complete base frame. The basic item of this accessory base frame is a "tank" which is filled on the spot with quartz sand. If hooked into the extension pieces of the base frame – an additional weight of appr. 60 kg per goal – the goal cannot tilt any more during normal use. An optimal predection which should by no means be omitted.

Technical features: Suitable for all freestanding junior soccer goals, small pitch goals and handball goals by us. Strong extension profiles 80 * 40 mm are simply mounted to the base frames of the goals. Per goal one weighting tank made of aluminium oval profile (for junior soccer goals aluminium square profile) is filled on the spot with quartz sand and hooked into the exension profiles.

If the goals are not used, the weighting tanks are simply taken out of the holding devices by pupils by means of the incorporated carrying grips and carried to a storage place. By loosening screws the extension profiles can be telescoped for space saving storage.

Existing goals with base frames made of aluminium square profile 80 * 80 mm or triangular profile 80 * 40 mm can certainly be equipped with these Safety base frames. This is also possible for goals of other marks, if there are same profile dimensions of the ground frames.

* In connection with
Junior soccer goals, Cat.-no. 120/121/120
Small pitch goals, Cat.-no. 140/141/1401
Handball goals, Cat.-no. 200/205

Standard equipment: Natural bright aluminium finish. Complete set consisting of 4 pieces Aluminium base frame extension profiles 80 * 40 mm, 2 pieces weighting tanks (unfilled) and incl. all necessary accessories for 1 pair of goals.

Cat.-no. 1223

Safety base frame for junior soccer goals "Transportable" for Cat.-no. 120/121, 1209/1219

Cat.-no. 1224

Safety base frame for small pitch goals "Transportable" for Cat.-no. 140/141, 1922

Cat.-no. 1225

Safety base frame for junior soccer goals "Transportable" with "Steel net hoops" for Cat.-no. 1201, 1205

Cat.-no. 1226

Safety base frame for small pitch goals "Transportable" with "Steel net hoops" for Cat.-no. 1401

Cat.-no. 2222

Safety base frame for handball goals "Transportable" for Cat.-no. 200 and handball goals with "Folding net hoops" of Cat.-no. 205

Supersafe anchoring systems

for freestanding goals on grass pitches

Our contribution for safety of freestanding goals on grass pitches:

All freestanding goals have to be anchored against tipping over acc. to EN 748/749.

In the past serious accidents have been caused due to unanchored or insufficiently anchored freestanding goals.

In order to avoid these accidents we developed our Safety anchoring systems which enable to secure the goals anywhere on pitches – acc. to DIN 18035 sheet 4. Safety has priority. Therefore these Safety anchoring system should be used for every freestanding goal. In order to meet the different demands two executions are offered:

Super:

made of very stable spiral-shaped anchors which are screwed into the ground and fastening plates of galvanized steel.

Standard:

made of simple spiral-shaped anchors and fastening plates of galvanized steel.

2 anchors are supplied for each goal.

Needless to say that Haspo goals already supplied can be retrofitted with these safety anchoring systems. This is also possible with goals of other marks if there are same profile dimensions of the ground frames.

Safety anchoring systems for all small training goals are described on page 34.

For junior soccer goals "Completely welded" of Cat.-no. 1055 and for soccer goals "Transportable" of Cat.-no. 109/110 (2 anchors for 1 goal).

Cat.-no. 1102 "Super"

Cat.-no. 11029 "Standard"

For junior soccer/small pitch goals "Transportable" of Cat.-no. 120/121, 1209/1219, 140/141, 119 and small handball/street soccer goals of Cat.-no. 1922 (4 anchors for 1 pair of goals).

Cat.-no. 1222 "Super"

Cat.-no. 12229 "Standard"

For soccer goals "Transportable" of Cat.-no. 103/104, 1034/1044 and 108, soccer goals "Compact" of Cat.-no. 1031/1041/1032/1042, junior soccer/small pitch goals of Cat.-no. 120/121, 1209/1219, 140/141 and 119 and small handball/street soccer goals of Cat.-no. 1922 (2 anchors for 1 goal).

Cat.-no. 12221 "Super"

Cat.-no. 122219 "Standard"

For junior soccer/small pitch goals and handball goals "Transportable" of Cat.-no. 1201/1401 and 200/205 (4 anchors for 1 pair of goals).

Cat.-no. 1227 "Super"

Cat.-no. 12279 "Standard"

For junior soccer/small pitch goals "Completely welded" of Cat.-no. 105/1052/1053/1059, 1054/10524/10534/10594, junior soccer/small pitch goals "Compact" of Cat.-no. 10511/10521/10531/10591, soccer goals "Transportable" – Type "Switzerland" of Cat.-no. 107/1081 and junior soccer/small pitch goals "Transportable" – Type "Switzerland" of Cat.-no. 117/118 and 1191 (2 anchors for 1 goal).

Cat.-no. 1228 "Super"

Cat.-no. 12289 "Standard"

For junior soccer/small pitch goals "Completely welded" of Cat.-no. 105/1052/1053/1059, 1054/10524/10534/10594, junior soccer/small pitch goals "Compact" of Cat.-no. 10511/10521/10531/10591, junior soccer/small pitch goals "Transportable" – Type "Switzerland" of Cat.-no. 117/118 and 1191 (4 anchors for 1 pair of goals).

Cat.-no. 1229 "Super"

Cat.-no. 12299 "Standard"

Safety anchoring systems

for small training goals on pitches

We recommend to fix also the small goals and therefore we developed these anchoring systems.

Cat.-no. 1106

Standard anchoring system for play and leisure goals of Cat.-no. 15145, for small training goals of Cat.-no. 15245/152145, 192/19245, 1921/192145, 1923, for small goals of Cat.-no. 1924/1925 and for street soccer goals of Cat.-no. 19229 (2 anchors for one goal)

Cat.-no. 1107

Standard anchoring system for small training goals of Cat.-no. 172/17245, 1721/172145, 1723 and street soccer goals of Cat.-no. 1726 (2 anchors for one goal)

Safety additional weights

for mini training goals

These safety additional weights were developed especially for the weighting of the mini training goals on plastic lawns, artificial lawns and hard pitches.

Steel weights are integrated into the safety additional weights. Through the attachment of the safety additional weights, the safe stability of the goal increases.

The safety additional weights are simply fixed with 2 securing straps each on the sides underneath the net hoops and can be dismantled easily at any time.

By using the additional weights, the weight of each goal increases by 24 kg.

For mini training goals with the Cat.-no. 192, 1921, 1923, 1924, 1925, 19229, 15245 and 152145

Standard equipment: Natural bright aluminium finish made of system profiles 80 * 40 mm. The length of the additional weights is 1 m. The dispatch is through a parcel service. A set (2 weights for a goal) is packed in a box which weighs 25 kg (see detail photo 1–2).

Cat.-no. 1340

For mini training goals with the Cat.-no. 172, 1721 and 1723

Standard equipment: Natural bright aluminium finish made of system profiles 80 * 80 mm. The length of the additional weights is 1 m. The dispatch is through a parcel service. A set (2 weights for a goal) is packed in a box which weighs 25 kg (see detail photo 3–4).

Cat.-no. 1350

Ground anchors

for playground and mini playground goals

These ground anchors were especially developed for freestanding playground and mini playground goals.

Can be used for all our goals with already welded brackets as well as goals of other marks with the appropriate brackets. A set consists of 2 galvanized steel ground anchors with inner threads and hexagonal bolts with washers.

The stability of the goal is ensured through the use of the ground anchors.

Cat.-no. 211

Net holder rail

The net holder rail has, compared to usual net holders, certain advantages:

  • nets can be easily and quickly hooked in/unhooked
  • net hooks must not be screwed in/slid in
  • net hooks do not get lost
  • same distance of hook-in points

The openings for the net within the net holder rail do not have sharp edges and are burr-free.

The net holder rail is slid into the profiles prior to welding the goal and can, therefore, not be stolen.

Profile and rails form one single unit.

The net holder rail is not only affixed in the crossbar/upright, but also at the ground bar and ground tube. Therefore, the net holder rail is integrated over the entire goal.

With this version, the completely welded goals which come in dimensions of 7.32 * 2.44 m, 5 * 2 m and 3 * 2 m are provided with net holder rail.

Cat.-no. 1034

= Cat.-no. 103 plus net holder rail

Cat.-no. 1044

= Cat.-no. 104 plus net holder rail

Cat.-no. 1054

= Cat.-no. 105 plus net holder rail

Cat.-no. 10524

= Cat.-no. 1052 plus net holder rail

Cat.-no. 10534

= Cat.-no. 1053 plus net holder rail

Cat.-no. 10594

= Cat.-no. 1059 plus net holder rail

Safety system net holder (SSN)

The Safety system net holder by Haspo with decisive advantages.

This net holder is suitable for all border ropes up to a thickness of 10 mm.

Fixation is done first to the net and then net and holder will be fixed together to the goal.

Very simple assembly. Bend off net holder, press border ropes into the eye – now the net holder is firmly fixed to the net.

When all net holders are assembled the net to be fixed to the goal by plugging into the notch of the goal profile and is then secured with a 90° turn. Very short assembly-time. Easier and faster than ever before.

Careful treatment of the nets since no sharp edges – nets will hold much longer.

No injuries possible and a very low construction height of 20 mm only.

The-high-quality plastic guarantees a high stability and longevity – rustproof is guaranteed.

All Haspo goals are supplied with this net fixation system (goals except with net holder rail).

All goals already delivered can be changed over without problem.

Cat.-no. 011001

Integrated safety system net holder (ISSN)

completely welded goals with ISSN

Because the ISSN is attached within a low-lying groove of the profile, it is flush with the profile. This brings significant advantages to the goalkeeper in the area of the ground frame. The risk of injuries is reduced. Additionally, the risk of injuries is reduced with contacts of the goalposts.

Since the groove which holds the net hooks has sufficient dimensions, mounting the net holder is very easy.

The completely welded goals which come in dimensions of 7.32 * 2.44 m, 5 * 2 m and 3 * 2 m are made of profiles which have a deep chamber.